Product Overview
The Bently Nevada 330101-00-19-10-02-00 is a high-precision 3300 XL series proximity (eddy-current) probe engineered to deliver reliable vibration and shaft-position sensing for critical rotating machinery. It solves early-fault detection challenges—bearing deterioration, shaft rubs and misalignment—by providing repeatable, high-resolution displacement signals that support predictive maintenance and reduce unplanned downtime in power generation, petrochemical and heavy-industry plants.

Technical Specifications

• Model: 330101-00-19-10-02-00

• Product series: Bently Nevada 3300 XL

• Module type: Proximity Probe (eddy-current sensor)

• Probe diameter / family: 8 mm series (3300 XL)

• Weight: 0.06 kg

• Dimensions: 122 × 1.5 × 1.2 cm

• Construction: Robust materials for industrial service (factory origin: USA)

• Typical output: Displacement/relative position signal for 3300-series proximitor electronics (see factory datasheet for electrical details)

• Typical applications: Turbines, pumps, compressors, motors — vibration and position monitoring in demanding environments

• System compatibility: Designed for Bently Nevada 3300/3300 XL monitoring systems (TSI)

• Lead time: In stock — ready for fast dispatch

• HS Code: 8537101190

Model Code Breakdown
Interpreting 330101-00-19-10-02-00 (typical meaning; confirm with official datasheet or factory):

• 330101 — Base part number identifying the proximity probe family and core sensing element.

• -00 — Body/finish or housing variant (often denotes basic mechanical configuration or material variant).

• -19 — Probe tip or sensing element variant (may indicate tip style, insulating sleeve or extension option).

• -10 — Cable/lead length or internal wiring variant (factory-configured cable assembly option).

• -02 — Connector/termination or mounting-adapter variant (specific connector type or mounting accessory code).

• -00 — Revision or special-option code (sometimes reserved for future or customer-specific options).
  Note: Suffix semantics vary across product tables. Always verify exact suffix-to-feature mapping with the official Bently Nevada parts table or datasheet before procurement or installation.

Installation Recommendations & Wiring Guide

• Mechanical mounting:

• Use a rigid probe mounting boss or bracket that prevents movement under load. Avoid flexible or loose clamps.

• Orient the probe so the sensing face is perpendicular to the target surface and aligned to measure the desired axis.

• Securely lock the probe mechanical zero per commissioning procedures.

• Probe gap:

• Set the working gap according to the OEM datasheet and the proximitor calibration; small, repeatable clearances are required for accurate displacement readings.

• Cabling and routing:

• Use manufacturer-specified shielded, twisted-pair cable. Route probe cable separately from power and high-current lines to minimize EMI.

• Provide drip loops and avoid tight bends; protect cable entries with proper glands.

• Shielding and grounding:

• Terminate cable shield at the monitoring/proximitor end (single-end grounding) unless system documentation specifies otherwise. Follow plant grounding standards to avoid ground loops.

• Electrical interface:

• Connect probe only to compatible proximitor electronics (e.g., Bently 3300-series transducer modules). Confirm pinout and polarity with the monitor wiring diagram.

• Commissioning checks:

• Verify continuity and insulation resistance before powering. With shaft stationary, verify zero offset and expected DC bias; perform run-up checks and record baseline signals.

• Safety:

• Observe lockout/tagout procedures and follow site safety rules when installing or servicing probes near rotating equipment.

FAQ — Common Questions

Q: What is the primary function of the 330101-00-19-10-02-00?
A: It is a proximity (eddy-current) probe used for displacement/position sensing and vibration monitoring of rotating machinery when paired with 3300-series proximitor electronics.

Q: Is this a genuine Bently Nevada part?
A: Yes — this listing is for genuine Bently Nevada 330101-00-19-10-02-00 probes. Units are in stock and available for fast shipment.

Q: What equipment is this probe best suited for?
A: Ideal for turbines, pumps, compressors and other rotating assets where accurate shaft-position and vibration monitoring are required.

Q: What are the probe’s physical dimensions and weight?
A: Dimensions: 122 × 1.5 × 1.2 cm. Weight: approximately 0.06 kg.

Q: How should the probe be connected electrically?
A: Use the factory-specified shielded twisted-pair cable and connect to the compatible 3300 proximitor/transducer module. Ground the cable shield per system documentation and maintain proper cable routing to avoid EMI.

Q: What is the lead time?
A: The item is listed as in stock for immediate dispatch; contact sales for regional shipping options and expedited delivery.

Q: Do you provide installation or calibration support?
A: Technical support for installation, commissioning and troubleshooting is available. For site-specific assistance, provide system model and wiring details.

For precise electrical pinouts, frequency/transfer curves, temperature and ingress ratings, and exact suffix-to-feature mapping, always consult the official Bently Nevada datasheet or factory technical support prior to installation or procurement.